Configuring generators in Master-Slave configuration

If experiment is performed by two generators, one of which is controlling repetition time (Master) and another being triggered by the master generator (Slave) SpecMan4EPR has to be configured in the following way:

Slave generator trigger option has to be set to External or ExtSlave mode.

A trigger command has to be introduced with a pattern that has two channels. First channel (exact type) must contain Master generator channel responsible for synchronization pulse. Second channel (exact type) must be assigned to Sync pulse property of Slave generator.

Example:

trigger 20ns %% sync pulse mwpulse 200 ns detect a,b

Legend: PPL keywords; PPL pulse commands; comments.